This little fabric box has a zipper in the base. When unzipped, the box folds flat to take up less room in your supply bag.
First, the backstory:
My local guild, the South Sound Modern Quilt Guild, hosted a "crumbs" swap this summer. The idea was to swap a bag of small scraps, make something from the scraps, and present it to the person whose scraps you received. Our "Swap Queen," Dianne Saugier, wrote a quickie set of directions to make this little box, a knock-off from a famous retailer.
When I made my box and posted a photo on social media, I received requests for a pattern. Because I didn't create the idea, I don't want to sell a pattern. But I'm happy to provide this free tutorial!
Here's what you need. Ten 5" squares -- I used charm squares from this Uppercase Volume 2 collection, purchased at a charming shop in Port Gamble, WA, Quilted Strait.
Four squares will be the exterior; four will be the interior; and two will be the base.
You'll need a nylon zipper, 9" or longer. I used the cut-off from another project and a new zipper pull from Atkinson Designs.
For "stiffening," you can use either Peltex from Pellon, or fusible fleece. I think the Peltex makes the box more stable, but if you have scraps of fusible fleece, that will work fine!
Cut the Peltex or fleece into 4¼" squares. You'll need four.
Cut the two base squares in half on the diagonal.
If you're nervous about inserting the zipper, use one of these products to baste your zipper in place before stitching. I don't baste, I just pin!
Stitch the right side of the interior base fabric to the right side of the zipper.
So that your box will rest stable, it's important that the zipper pull be inside your box.
After you've sewn one side of the zipper. line up the second half of the interior base half-square and stitch.
Next, stitch the exterior base fabric half-squares to the bottom side of the zipper.
I'm showing you how I make sure I have the right sides of both base fabrics together.
[You'll see why in the last step!]
Stitch the last seam and press it open. I have this nifty seam press tool that makes it possible to press the seam open without pressing a crease in the rest of my box.
Now we're ready to put it all together!
Pin one side of the interior to the interior of the base.
Flip the seam aside and start stitching right on the vertical seam of the interior square. Back stitch and stitch across to exactly the opposite seam, back stitch again.
Repeat for the remaining three sides.
Here's what your box looks like after all four sides of the interior are stitched to the base.
Repeat just as you did for the interior. Be sure NOT to catch the seam allowances, and fold the sides you're not stitching away from the side you are stitching.
Here's what your box looks like so far:
Remember, the zipper pull should be on the inside!
Use a point turner to push out the corners -- if you have a tool like this, it works really well!
We're almost there!
The only thing left is to insert the Peltex and stitch the top edges closed!
Insert a square of Peltex into each side of the box. Smooth the top edge of the exterior fabric over the top of the Peltex and pin all three layers (exterior-Peltex-interior) together.
Topstitch as close to the edge as possible to catch all three layers (about 1/8"). I've found if I stitch carefully along each vertical seam, the box is a little more stable.
To collapse your box, open the zipper. Yay!
A final note: this tutorial has not been test-sewn. So if you find a mistake, or have a problem with a step, feel free to email me at AuntMarti at 52Quilts dot com!
From the desk of your
